ASSEMBLY GUIDE
01
Box contents.
02
Rotate handle bar stem to the upright position.
03
Lock handle bar stem in its fixed position, adjust handle bar to desired height.
04
Install handle bar in handle bar stem.
05
Close faceplate.
06
Install quick realease clamp.
07
Adjust handle bar to desired angle and tighten securely.
08
Install seat post into tube, set desired height within the specified range and tighten securely.
09
Connect booster battery power plug.
10
Remove front fork and brake caliper protectors.
11
Insert front wheel carfully aligning the brake disk between the caliper brake pads.
12
Insert axle.
13
Tighten securely.
14
Install left pedal and tighten securely in the anticlockwise direction using a 15mm spanner.
15
Install right pedal and tighten securely in the clockwise direction using a 15mm spanner.
16
Assembly complete, charge batteries to 100% - Display unit user manual in box.
NOTE
Seat post booster battery charge port location.
Main battery charge port location.